Meirro← Back to home

Technical Specifications

Every number.
Accounted for.

The complete spec sheet for the Meirro Pro Display 6K. Each unit is individually measured at the factory and shipped with the calibration report we used to verify it before it left the line.

Display

Panel TypeNano IPS Black
Size32.0" diagonal
Aspect Ratio16:9
Active Area696.73 × 391.91 mm
Resolution6144 × 3456 (6K)
Pixel Density224 ppi
Pixel Pitch0.1134 mm
Refresh Rate60 Hz
Response TimeGTG 14 ms
Brightness450 nits typical (SDR) · 750 nits (HDR enabled)
Contrast2,000:1 native
Viewing Angle178° H · 178° V
SurfaceAnti-glare glossy
BacklightEdge-lit LED

Colour

Colour SpacesRGB · DCI-P3 · Adobe RGB
sRGB Coverage99%
DCI-P3 Coverage98%
Adobe RGB Coverage99%
Bit Depth10-bit (1.07 billion colours)
CalibrationFactory, per-unit
Delta EΔE < 2 average
Calibration ReportIncluded with every unit

Connectivity

USB-C Upstream× 1 · 80 Gbps
USB-C Downstream× 4 · USB 2.0 · 480 Mbps
USB Power DeliveryUp to 96 W host charging
ProtocolsThunderbolt 4 · USB4
CableUSB-C / Thunderbolt 4 cable (2 m) included

Power

Input100–240 V AC, 50/60 Hz
Power CordDetachable IEC C13
Typical Draw~55 W (SDR, 200 nits)
Maximum Draw~210 W (including 96 W host charging)
Standby< 0.5 W

Physical

Size32.0" diagonal
Weight (panel)3.83 kg
Weight (monitor)8.92 kg
Body MaterialCNC anodized aluminum alloy
StandIncluded · CNC anodized aluminum alloy
Stand Tilt-5° to +25°
VESA Mount100 × 100 mm

Environment

Operating Temp0° to 35° C
Storage Temp-20° to 60° C
Humidity10–90% non-condensing
AltitudeUp to 3,048 m operating · 12,192 m storage

In the Box

DisplayMeirro Pro 32" 6K Monitor
StandCNC anodized aluminum stand
CableUSB-C / Thunderbolt 4 (2 m)
PowerDetachable IEC C13 cable
DocumentsPer-unit calibration report · Quick-start guide

Warranty & Support

Warranty2-year limited hardware warranty
Supportsupport@meirro.com
ReplacementAdvance replacement available

Measurement MethodAll colour figures are measured at the factory using a tristimulus colorimeter against a 100% reference patch at the centre of the screen, after a 30-minute warm-up. Brightness is measured in SDR at the panel's default colour mode.

DisclaimerSpecifications subject to change without notice. All measurements are approximate. Colour accuracy figures are based on the factory calibration of production units and may shift slightly with use; we recommend recalibration every 6–12 months for professional workflows.

© 2026 Meirro. All rights reserved.

Testing guideAbout usContact